- #Printing a booklet in word 2003 pdf#
- #Printing a booklet in word 2003 driver#
- #Printing a booklet in word 2003 professional#
The graphics touching the edge will then extend beyond your publication page by 1/8 inch. Once you have adjusted your design, change your page size back to 8.5″ x 11″. Grouping graphic elements will allow you to move elements together and make the adjustments quicker. You may scale vector objects, but be sure you do not distort photographs. Next, adjust the graphics to the edge of the document. For example, if your document is 8.5″ x 11″, your new document size will be 8.75″ x 11.25″. This will add an additional 1/4 inch to both the width and the height of your document. You need to add 1/8 inch (.125″) of bleed on all four sides of your document.
Under Page, enter the dimensions required for your document. Start by opening the Page Setup dialog box.
#Printing a booklet in word 2003 pdf#
To ‘fake’ a bleed in Publisher you will need to change the paper size, adjust the graphics and then return the document to the original size before creating a PDF or sending your. Staying within this safe zone ensures your design will not cut off important content after printing and trimming. Create a Bleed in a Microsoft Publisher 2010 Documentīefore you start adding bleed to your design, be sure you do not have important design elements or text boxes closer than 1/8 inch to the inside edge of your document.
#Printing a booklet in word 2003 professional#
For borderless, professional printing, bleed is required by most commercial printers, and is recommended for the highest quality print output. If this is good enough for your purposes, read no further as you do not need to add bleed to your design. Most home and office printers cannot print to the edge and will leave a white margin, cutting into your design. But if you do, and you don’t want a slight error to cause the cutter to miss the edge and leave white around the edges, you’ll want bleed. If you design the page without blocks of color, photos or graphics going right to the edge of the page, you don’t need bleed.
#Printing a booklet in word 2003 driver#
Refer to your printer manual or do some searching through the printer driver settings to find more information.Simply put, bleed is a slight overlap or extension of the printed area added beyond the borders of a printed page to make sure graphics or solid colors go right to the edge after trimming. Some printers will handle booklet printing automatically. You may also be able to print booklets by using the capabilities of your printer. A few programs suggested by WordTips readers include the following:Īnother alternative would be to save you document as a PDF and print the booklet from the PDF program. If you prefer, you can also use a third-party program that produces booklets. If not, you should choose the Manual Duplex check box in the Print dialog box, and then feed the pages through the printer twice. When you print your document, you should choose to print two-sided if you have a printer that will automatically duplex. The text in your document is reformatted to fit within the page layout you just specified.
The Margins tab of the Page Setup dialog box.